Preparation, microstructure and mechanical properties of porous titanium sintered by Ti fibres.

Preparation, microstructure and mechanical properties of porous titanium sintered by Ti fibres. Research Abstract Details 

Research Abstract Table of Contents

Jump to the:

Preparation, microstructure and mechanical properties of porous titanium sintered by Ti fibres. Abstract Text:

Chunming Zou,Erlin Zhang,Mingwei Li,Songyan Zeng,Chunming Zou,Erlin Zhang,Mingwei Li,Songyan Zeng,

Open-cell porous Ti with a porosity ranging from 35 to 84% was successfully manufactured by sintering titanium fibres. The microstructure of the porous titanium was observed by SEM and the compressive mechanical properties were tested. By adjusting the spiral structure of the porous titanium, the pore size can be controlled in a range of 150-600 mum. With the increasing of the porosity, compressive yield strength and modulus decrease as predicated. However, high mechanical properties were still obtained at a medium porosity, e.g. the compressive yield strength and the modulus are as high as 100-200 MPa and 3.5-4.2 GPa, respectively, when the porosity is in the range of 50-70%. It was suggested that the porous titanium be strong enough to resist handing during implantation and in vivo loading. It is expected to be used as biocompatible implant, because their interconnected porous structures permit bone tissues ingrowth and the body fluids transportation.

Preparation, microstructure and mechanical properties of porous titanium sintered by Ti fibres. Publishing Authors By Initials

C Zou,E Zhang,M Li,S Zeng,C Zou,E Zhang,M Li,S Zeng,

For similar abstracts research abstracts see: abstracts research

PUBMED ID PMID:

MEDLINE DATE:

Preparation, microstructure and mechanical properties of porous titanium sintered by Ti fibres. Journal Published:

PUBLICATION TYPE: Journal Article

Journal: Journal of materials science. Materials in medicin

VOLUME: 19

Page Numbers: 401-5

Journal Abbreviation:

ISSN: 0957-4530

DAY: 3

MONTH: 07

YEAR: 2007

Preparation, microstructure and mechanical properties of porous titanium sintered by Ti fibres. Information

Number of References:

LANGUAGE: eng

NlmUniqueID: 9013087

Preparation, microstructure and mechanical properties of porous titanium sintered by Ti fibres. Keywords Mesh Terms:

KEYWORDS:

MESH TERMS:

Chemical & Substance for Abstract: Preparation, microstructure and mechanical properties of porous titanium sintered by Ti fibres. Information

Substance Name:

Registry Number:

Grant and Affiliation Information for Preparation, microstructure and mechanical properties of porous titanium sintered by Ti fibres.

AFFILIATION: School of Materials Science and Engineering, Harbin Institute of Technology, Harbin, 150001, P.R. China.

Country: United States

AGENCY:

GRANT:

ACRONYM:

MEDLINETA: J Mater Sci Mater Med

REFSOURCE:

DATABASENAME:

ACCESSION NUMBER:

Number Hits: 0

Preparation, microstructure and mechanical properties of porous titanium sintered by Ti fibres Related Publications

• BU-CTX(2) as conditioning regimen for allogeneic hematopoietic stem cell transplantation in sixty patients with leukemia.
• Effect of terazosin on blood pressure and serum lipids.
• How proteins pack into crystals: nuclei achieve translation symmetries by growing.
• Quality control of postoperative acute pain service.
• [A seroepidemiological survey: antibody to HTLV-1 in sera from various populations in Guangdong Province]
• [Application of vital dye CFDA-SE to study lymphocytic proliferation]
• [Clinical features of primary Sjgren's syndrome in childhood]
• [Clinical pathologic studies and genetic analysis of a female Duchenne muscular dystrophy family]
• [Complex mutations of 1311 C-->T in exon 11 and 93 T-->C in intron 11 in G6PD gene]
• [Correlative study between angiotensin-converting enzyme gene polymorphism and hepatorenal syndrome.]
• [DSA manifestation of primary hepatocellular carcinoma complicated by tumor thrombus in the inferior vena cava]
• [Detection of Epstein-Barr virus in T cell lymphoma and clinicopathologic analysis]
• [Determination of aceclofenac in human plasma by reversed-phase high performance liquid chromatography]
• [Determination of demethylvancomycin in neonate serum by high performance liquid chromatography]
• [Downregulation of gap junctional intercellular communication induced by silicon dioxide in the pulmonary alveolar epithelial cell]
• [Effects of microwave radiation on the content of five elements in mice bone tissue]
• [Epileptiform activity of the anterior dorsal hippocampal network induced by acute tetanization of the right posterior dorsal hippocampus of the rat]
• [Gas chromatographic analysis of methyl methacrylate and methanol in its esterification mixture]
• [Induction of human oral carcinoma by human papillomavirus 16 E6/E7 and TPA]
• [Isolation and identification of two novel polyhydroxylated sterol from Spongia obligue]
• [Localization of the connexin 43 gap-junction protein in silica-exposed alveolar epithelial cells]
• [Observation and research on the electroporation of S-180 cell induced by electric pulse]
• [Recombinant AAV-LMP-induced LMP specific cytotoxic response to autologous lymphoblastoid cell lines tranformed by Epstein-Barr virus]
• [Retinal vein occlusion with retinal arteriovenous communications]
• [Selection of optimal extraction process for magnolol by orthogonal design]
• [Serological survey of human T lymphotropic virus type I (HTLV-1) IgG antibody in south region of Xinjiang]
• [Study on occupational health hazards in building Qingzang railway and effectiveness of preventive measures.]
• [The expression of heat shock protein 70 (HSP70) in the cells of rat liver and cardiac muscle in different heat exposure stages]
• [The role of nitric oxide in hyperdynamic circulation in portal hypertensive rats]
• [Treatment of OSAS with modified twin-block advancement appliances]