New RACE, a variation of RNA ligase-mediated-RACE (RLM-RACE) (Liu and Gorovsky 1993) departs from classic RACE (see 5'-End cDNA Amplification Using Classic RACE) in that an "anchor" primer is attached to the 5'-end of the mRNA before the reverse transcription step; hence the anchor sequence becomes incorporated into the first-strand cDNA if, and only if, the reverse transcription proceeds through the entire length of the mRNA of interest. - [Read 5'-End cDNA Amplification Using New RACE Protocol]
Protocol for a single-step method for the simultaneous preparation of DNA, RNA, and protein from cells and tissues. The yield of total RNA depends on the tissue or cell source, but it is generally in the range of 4-7 µg/mg starting tissue or 5-10 µg/106 cells. IMPORTANT: Prepare all reagents used in this protocol with Diethyl pyrocarbonate (DEPC)-treated H2O. - [Read A Single-step Method for the Simultaneous Preparation of DNA, RNA, and Protein from Cells and Tissue]
Protocol for bisulfite-PCR for restriction analysis and/or sequencing. Bisulfite-PCR followed by restriction is a rapid and semi-quantitative method of analyzing DNA methylation. The PCR products are also suitable for either direct sequencing or cloning and sequencing. The most important step here is primer selection. - [Read Bisulfite-PCR for Restriction Analysis and/or Sequencing Protocol]
Freezing gealthy cells (> 95% viable) the protocol obtains a culture 80-90% viable 24 hours after thawing and growing on test vial from step 9. Antisense Research Group - [Read Cell Freezing using Liquid Nitrogen N2]
The key step is the lysis which solubilizes centrosomes away from nuclei by very low ionic strength lysis after treatment of cells with nocodazole and cytochalasin B. The released centrosomes are then centrifuged onto a Ficoll cushion (to avoid pelleting) and the interface between the lysate and the Ficoll is collected and the centrosomes are concentrated on a sucrose gradient. Fractions are assayed by spindown and double IF with 5051 serum and anti-tubulin and the pooled fractions are frozen... - [Read CHO Centrosome Prep Protocol]
The first step in competitive RT-PCR is the synthesis and purification of the synthetic competitor. This is an RNA molecule designed to be reverse-transcribed and PCR-amplified with the same efficiency as the endogenous transcript of interest. Once the competitor molecule has been prepared, as described in this protocol, competitive PCR can be carried out. - [Read Competitive RT-PCR: Preparation of Competitor RNA Protocol]
Protocol is the second step in a three-step process for the preparation and enrichment of phosphopeptides using immobilized metal affinity chromatography (IMAC) for the identification of the phosphopeptides by LCMS/ MS. This procedure describes the construction of microchromatographic columns, or micro-tips. - [Read Construction of Micro-Tip for Use in IMAC Protocol]
Determination of the CpG Island Methylator Phenotype (CIMP) in colorectal cancer using MethyLight. Protocol describes a detailed, step-by-step protocol of the MethyLight assay for detection of CIMP with high sensitivity and specificity in colorectal cancer using a five marker panel composed of CACNA1G, IGF2, NEUROG1, RUNX3 and SOCS1. - [Read Determination of the CpG Island Methylator Phenotype (CIMP) in colorectal cancer using MethyLight]
Method for amplifying DNA enzymatically by the polymerase chain reaction (PCR), including procedures to quickly determine conditions for successful amplification of the sequence and primer sets of interest, and to optimize for specificity, sensitivity, and yield. The first step of PCR simply entails mixing template DNA, two appropriate oligonucleotide primers, Taq or other thermostable DNA polymerases, deoxyribonucleoside triphosphates (dNTPs), and a buffer. - [Read Enzymatic Amplification of DNA by PCR: Standard Procedures and Optimization Protocol]
A crude lysate gel assay can be performed to roughly quantitate the DNA in lysates. This is often a valuable time saving step to determine if the phage yield is sufficient to warrant continuing the procedure. - [Read Gel Assay to Determine DNA Content of Phage Lysates Protocol]
This protocol describes the first step in constructing an array: amplification of the predicted ORFs that are to be included in the array. Gene-specific primers containing vector-specific flanking sequences that facilitate recombinational cloning are used to amplify each ORF. A secondary amplification can be used to extend the length of the homologous vector sequence flanking the ORF. - [Read Genome-Wide Analysis of Protein-Protein Interactions Using a Two-Hybrid Array: Amplification of ORFs]
After fixation, frozen sections are immunostained under RNase-free conditions using a rapid three-step streptavidin-biotin technique followed by dehydration. The immunostained sections are ready for LCM. Includes: Development of Immuno-LCM. - [Read Immuno-Laser Capture Microdissection Protocol]
Protein immunoprecipitation can be a useful preparative step for immunoblotting. For very rare proteins, the protein of interest can be purified and concentrated by standard immunoprecipitation techniques before immunoblotting. In addition, protein-protein interactions can be tested with an immunoprecipitating antibody that is specific for one protein of a complex and an immunoblotting antibody that is specific for a second member of the complex. - [Read Immunoblotting: Preparing Immunoprecipitated Proteins Protocol]
To reduce backgrounds and to improve the signal-to-noise ratio, an antibody that does not recognize the antigen being studied can be added to the lysate and processed as for a normal immunoprecipitation. Any nonspecific proteins that might contaminate the final immunoprecipitation step are presumably removed with this irrelevant antibody. - [Read Immunoprecipitation: Preclearing the Lysate Protocol]
Protocol outlines the general procedure and requirements for in vitro translation of CFTR and outlines some assays using in vitro translated product. Core glycosylation of CFTR occurs in the ER. An assay for this processing step requires the
addition of microsomal membranes to the basic in vitro translation mixture. This protocol takes this into account. - [Read In vitro Translation Assays for CFTR]
Protocol is the first step in a three-step process for the preparation and enrichment of phosphopeptides using immobilized metal affinity chromatography (IMAC) for the identification of the phosphopeptides by LC-MS/MS. This procedure is used to prepare protein extracts from WEHI-231 cells. This preparation method provides total cellular protein samples that are free of contaminating nucleic acids. - [Read Lysis and Protein Extraction from WEHI-231 Cells with TriPure Isolation Reagent Protocol]
Quick and reliable method to analyze meiotic segregation patterns in Coprinus cinereus using the polymerase chain reaction. The advantages of this method include: 1. The tissue is grown and lyophilized in the same tube, which facilitates the simultaneous analysis of many segregants. 2. Only one extraction step is necessary. 3. The markers are scored by gel electrophoresis, thereby bypassing Southern analysis. - [Read Method to Analyze Meiotic Segregation Patterns in Coprinus cinereus Using PCR]
The "7 keys to successful microarray analysis" has been designed to guide researchers step-by-step through the design, implementation, analysis, and publication of a microarray experiment. - [Read Microarray Success]
Mirmira Lab ChIP Protocol. 50-step protocol forformaldehyde crosslinking to ChIP and also provides recipes for all buffer reagents. - [Read Mirmira Lab ChIP Protocol]
One step extraction for isolation of plant DNA. DNA suitable for amplification by PCR can be produced from leaf material smaller than 0.3 mm2 in less than 20 min & no tube changes. Method was tested on several plant species. Method was found to extract DNA that could be amplified without any further purification or treatment. The isolated DNA was amplified using a universal chloroplast primer set. The method was validated by comparing size of PCR products generated using standard DNA isolation. - [Read One-Step Isolation of Plant DNA Suitable for PCR Amplification]
Using molecular marker technology in studies on plant genetic diversity. DNA-based technologies: PCR-based technologies
Amplified fragment length polymorphisms (AFLPs. Includes: AFLP technology, step by step; DNA digestion and ligation; PCRs and detection; Summarising the technology. - [Read PCR-Based Technologies Amplified Fragment Length Polymorphisms (AFLPs)]
DNA prepared by PCR-mediated gene disruption can be used to transform yeast in gene replacement experiments. This protocol uses two primers, tailed with approximately 50 nucleotides homologous to the gene of interest, that target insertion of the PCR product to that locus. Each primer ends with a universal sequence that is designed to amplify various selectable markers from plasmid templates. - [Read PCR-Mediated Gene Disruption: One-Step Method Protocol]
Protocol is specifically for the further enrichment of phosphopeptides from a phosphotyrosine pull-down. This is the final step for the preparation and enrichment of phosphopeptides using immobilized metal affinity chromatography (IMAC) for the identification of the phosphopeptides by liquid chromatography tandem mass spectrometry (LC-MS/MS). - [Read Preparation and Enrichment of Phosphopeptides from Phosphotyrosine Protocol]
A Single Stranded Plasmid DNA Isolation Protocol describing the production and isolation of single-stranded DNA (ssDNA) using bacteriophagemid-containing bacteria and helper phage. Infection of the host cells with helper phage allows for packaging of ssDNA into bacteriophage. The ssDNA can then be isolated from phage particles.
DNA microarrays are an ordered arrangement of DNA molecules complementary to genes of interest that are "spotted" by robotic equipment onto a glass slide substrate. The expression of genes in cells can be monitored with microarrays by preparing cDNA from the mRNA of cells of interest and measuring the hybridization to the microarray. This protocol describes the labeling of genomic DNA for use as a probe for hybridization to the cDNA spotted on the array.
Tubulin is polymerized into microtubules by incubating tubulin at 37°C with GTP. A nucleation seed is added when the purpose is to assay microtubule elongation. Tubulin can also be polymerized for the purposes of recycling the tubulin or labeling the microtubules with fluorescently labeled tubulin. Based on the protocol by Timothy Mitchison of Harvard University.
This Microarray Protocol Preparation of Fluorescent DNA Probes from Human mRNA protocol describes the production of probes labeled with the fluorescent dyes, Cy3 and Cy5, following the synthesis of cDNA from human mRNA and the hybridization of the probes to DNA microarrays.
A single step RNA isolation protocol using Phenol Chloroform Extraction and Acid Guanidinium Thiocyanate. This RNA isolation method uses the fact that guanidinium thiocyanate can simultaneously lyse the cells and inactive cellular RNAses during the initial RNA isolation step allow a single step in the method.
Paraffin Embedding Protocol for molecular profiling. This Paraffin Embedding Protocol describes the processing of the tissues into sections following ethanol fixation. Molecular profiling (MP) is a technique that is used to visualize the global patterns of RNA expression or protein expression in various cell types and disease processes.
In Vitro Translated Xenopus Mos Kinase Assay Protocol. In response to progesterone, immature Xenopus oocytes mature to eggs that can be fertilized. The Mos protein kinase is essential for oocyte maturation, most likely due to its ability to activate the MAP kinase cascade. This MAP kinase cascade eventually leads to the activation of Cdc2/cyclin B and entry into M phase. In this protocol, tagged Mos kinase is translated in vitro, immunopurified, and used in a kinase assay.
A protocol for the selection of Phage Antibodies using Immobilized Antigen. This method describes the selection of antibodies from bacteriophage antibody libraries that recognize a specific antigen. The phage display library of antibody-displaying phage particles is exposed to antigen attached to a solid substrate (Nunc Immuno™ tubes). The phage particles with affinity for antigen bind to the immobilized antigen and are selected from the library of phage expressing antibodies.