PCR cycle steps, protocol using SuperScript II reverse transcriptase (Life Technologies) and Taq polymerase, Gene specific primer, T17 Adapter primer and an Adapter primer. Dr.Dawson, Nottingham. - [Read 3' Rapid Amplification of cDNA Ends (RACE) Protocol]
To generate "3'-end" partial cDNA clones, mRNA is reverse-transcribed using a "hybrid" primer (Qtotal, QT) that consists of two mixed bases (GATC/GAC followed by [T]17) and a unique 35-base oligonucleotide sequence (QI-QO). Amplification is then performed using a primer containing part of this sequence (Qouter, Qo) (which now binds to each cDNA at its 3'-end) and a primer derived from the gene of interest, GSP1 (gene-specific primer 1). - [Read 3'-End cDNA Amplification Using Classic RACE Protocol]
To generate "5'-end" partial cDNA clones using classic RACE, the first-strand products are generated by reverse transcription (primer extension) from a known gene-specific primer (GSP-RT). Then, a poly(A) tail is appended using terminal deoxynucleotidyltransferase (Tdt) and dATP. Amplification is carried out using three primers. - [Read 5'-End cDNA Amplification Using Classic RACE Protocol]
New RACE, a variation of RNA ligase-mediated-RACE (RLM-RACE) (Liu and Gorovsky 1993) departs from classic RACE (see 5'-End cDNA Amplification Using Classic RACE) in that an "anchor" primer is attached to the 5'-end of the mRNA before the reverse transcription step; hence the anchor sequence becomes incorporated into the first-strand cDNA if, and only if, the reverse transcription proceeds through the entire length of the mRNA of interest. - [Read 5'-End cDNA Amplification Using New RACE Protocol]
The MagneSil system can selectively isolate PCR products that are more than 150-bp long from primers and primer -dimers. The technology can be used with a number of robotic workstations, including Beckman Coulter’s Biomek 2000 and FX Laboratory Automation Workstations. The procedure can also be carried out manually. Typical recovery is more than 80% for a 1-kb product with negligible carryover of primers or nucleotides. - [Read A Magnetic Particle-Based Method for Purifying PCR Products from Solution Protocol]
DNA for analysis is purified using salt precipitation. The method is gentle, limits the breakage of the long chromosomal strands, and avoids the use of phenol and chloroform. It is suitable for use with cultured cells, breast tumor tissue that has been subjected to hormone receptor analysis, and blood samples. The loss of heterozygosity assay is performed using a multiplex PCR, in which one of each primer pair is labeled with a different fluorophor. - [Read A Multiplex PCR Method to Define a Narrow Deleted Chromosomal Region of a Tumor Genome]
An oligodeoxynucleotide primer hybridized to mRNA is extended by an RNA-dependent DNA polymerase to create a cDNA copy that can be amplified by PCR. Depending on the purpose of the experiment, the primer for first-strand cDNA synthesis can be specifically designed to hybridize to a particular target gene, or a general primer such as oligo(dT) can be used to prime cDNA synthesis from essentially all mammalian mRNAs - [Read Amplification of cDNA Generated by Reverse Transcription of mRNA Protocol]
Protocol uses a single thermostable RNA polymerase to perform high-specificity RT-PCR. A high-temperature RT reaction is followed by PCR amplification of the cDNA using a single thermostable poymerase, the GeneAmp AccRT RNA PCR enzyme from Applied Biosystems. The high temperature of the RT reaction enhances the specificity of primer binding and also reduces secondary structure in the template, thereby increasing the efficiency of polymerization. - [Read Amplification of RNA: High-Temperature Reverse Transcription and DNA Amplification with a Magnesium]
Protocol for bisulfite-PCR for restriction analysis and/or sequencing. Bisulfite-PCR followed by restriction is a rapid and semi-quantitative method of analyzing DNA methylation. The PCR products are also suitable for either direct sequencing or cloning and sequencing. The most important step here is primer selection. - [Read Bisulfite-PCR for Restriction Analysis and/or Sequencing Protocol]
Cloning protocols/tips by Astrid. PCR and primer design, Extracting DNA from gel, Restriction of vector, Ligation, and Transformation. CalTech - [Read Cloning protocols/tips by Astrid PDF]
Protocol describes the use of PCR to screen for bacteria that carry recombinant plasmids. The PCR can be carried out using the same primers as for amplification of the cloned insert. To determine the orientation of the insert, a third, insert-specific primer that is asymmetrically distanced from the clonal insertion site can be used. - [Read Colony PCR Protocol II]
When imaging specimens in the optical microscope, differences in intensity and/or color create image contrast, which allows individual features and details of the specimen to become visible. Contrast is defined as the difference in light intensity between the image and the adjacent background relative to the overall background intensity. In general, a minimum contrast value of 0.02 (2 percent) is needed by the human eye to distinguish differences between the image and its background. - [Read Contrast in Optical Microscopy]
The visibility of the faint star light is enormously enhanced against a dark background. This principle is applied in darkfield (also called darkground) microscopy, a simple and popular method for making unstained transparent specimens clearly visible. Such objects often have refractive indices very close in value to that of their surroundings and are difficult to image in conventional brightfield microscopy. - [Read Darkfield Illumination]
Method uses PCR to amplify and display many cDNAs derived from the mRNAs of a given cell or tissue type. The method relies on two different types of synthetic oligonucleotides: anchored antisense primers and arbitrary sense primers. A typical anchored primer is complementary to approx. 13 nucleotides of the poly(A) tail of mRNA and the adjacent two nucleotides of the transcribed sequence. - [Read Differential Display-PCR Protocol]
Primer design, Primer annealing, Primer labelling, Probe purification, In vitro hybridization DNA-protein Binding reaction. Jonathan Flint. - [Read EMSA Protocol using 32-p.]
Method for amplifying DNA enzymatically by the polymerase chain reaction (PCR), including procedures to quickly determine conditions for successful amplification of the sequence and primer sets of interest, and to optimize for specificity, sensitivity, and yield. The first step of PCR simply entails mixing template DNA, two appropriate oligonucleotide primers, Taq or other thermostable DNA polymerases, deoxyribonucleoside triphosphates (dNTPs), and a buffer. - [Read Enzymatic Amplification of DNA by PCR: Standard Procedures and Optimization Protocol]
This cDNA synthesis system simplifies your work dramatically. All reaction components are premixed and lyophylised. You have to add your RNA and (for Your-Prime beads) the primer. Another advantage of the system is a little number of pipetting steps required, and therefore reduced risk of Rnase contamination and RNA degradation. - [Read First strand cDNA synthesis with Ready-To-Go Beads Protocol]
FP-TDI Method for SNP Detection. The FP-TDI protocol was originally reported by Drs. Chen, Levine, and Kwok at Washington University in 19991,2. FP-TDI stands for template directed dye terminator incorporation assay with detection by fluorescence polarization. It is a single base primer extension assay couple with homogeneous FP detection. Perkin Elmer - [Read FP-TDI Method for SNP Detection]
The double-stranded DNA of recombinant plasmid, phagemid, or bacteriophage M13 replicative form DNA is digested with two restriction enzymes whose sites of cleavage both lie between one end of the target DNA and the binding site for universal primer. The enzyme that cleaves nearer the target sequence must generate either a blunt end or a recessed 3' terminus; the other enzyme must generate a four-nucleotide protruding 3' terminus. - [Read Generation of Sets of Nested Deletion Mutants with Exonuclease III Protocol]
24-mer A=4, C=10, G=2, T=8, HLA-A2.1 ( 003475) primer designed in Mouse Genotyping lab. ... This genotyping protocol is used for the following strains: ... - [Read Genotyping Protocol for TgN(HLA-A2.1)1Enge]
Protocol for in vitro transcription with yeast nuclear extract. Includes recipes for: 5x Acetate transcription buffer; Creatine phospho kinase; Phospho creatine; Stop mix; HA + 0.1 M potassium acetate; 5x glutamate transcription buffer (5 ml). Includes also protocol for Primer Extension Assay. - [Read In Vitro Transcription With Yeast Nuclear Extract]
Live-cell imaging techniques provide critical insight into the fundamental nature of cellular & tissue function, especially due to the rapid advances that are currently being witnessed in fluorescent protein & synthetic fluorophore technology. Because of these advances, live-cell imaging has become a requisite analytical tool in most cell biology labs. Includes: Maintaining Live Cells on the Microscope Stage; Live-Cell Imaging Culture Chambers; Optical System and Detector Requirements etc. - [Read Introduction to Live-Cell Imaging Techniques]
DNA microarrays are an ordered arrangement of DNA molecules complementary to genes of interest that are "spotted" by robotic equipment onto a glass slide substrate. The expression of genes in cells can be monitored with microarrays by preparing cDNA from the mRNA of cells of interest and measuring the hybridization to the microarray. This protocol describes the labeling of genomic DNA for use as a probe for hybridization to the cDNA spotted on the array.
This Microarray Protocol Preparation of Fluorescent DNA Probes from Human mRNA protocol describes the production of probes labeled with the fluorescent dyes, Cy3 and Cy5, following the synthesis of cDNA from human mRNA and the hybridization of the probes to DNA microarrays.
3' Rapid Amplification of cDNA Ends RACE Using PCR Protocol. This protocol contains the steps for 3' end rapid amplification of mRNA by PCR. The first-strand cDNA is synthesized from total or poly(A+) RNA by priming from the poly-A tail of the mRNA using a oligo (dT) adaptor primer. The cDNA is then amplified via PCR using a gene-specific primer and an adaptor primer.