Solvent partition protocol allows the isolation of gangliosides from small samples and from samples where ganglioside concentrations are low, especially relative to the concentration of potentially contaminating proteins and other large molecular weight species. Stephan Ladisch Director, Center for Cancer and Transplant Biology, Children's National Medical Center, Washington, D.C. - [Read A Method for Micro-Scale Isolation and Purification of Gangliosides]
Protocol for a single-step method for the simultaneous preparation of DNA, RNA, and protein from cells and tissues. The yield of total RNA depends on the tissue or cell source, but it is generally in the range of 4-7 µg/mg starting tissue or 5-10 µg/106 cells. IMPORTANT: Prepare all reagents used in this protocol with Diethyl pyrocarbonate (DEPC)-treated H2O. - [Read A Single-step Method for the Simultaneous Preparation of DNA, RNA, and Protein from Cells and Tissue]
Protocol for cloning genes from a phage library. Includes: Titer and plate out phage; Lift plaques onto filters and prepare them for screening; Make a probe; Hybridize the probe to the filters; Wash the filters and expose to film; Purify putative plaques; Excise plasmid from the desired phage. - [Read Clone Genes From a Phage Library Protocol]
In this protocol, the DNA-binding capacity of Wizard MagneSil particles is used to capture and release a consistent amount of DNA (100 ng) across a wide range of samples. At the end of the procedure, the DNA is eluted into 100 µl Elution Buffer to give a final concentration of 1 ng/µl, relieving the need for postpurification DNA quantitation. - [Read DNA IQ Isolation of Genomic DNA from Stains and Buccal Swabs Protocol]
Procedure is used to prepare DNA simultaneously from many different types of samples or tissues. Although the DNA is generally too small (approx. 80 kb) for efficient construction of genomic DNA libraries, it gives excellent results in Southern hybridizations and PCRs. Cultured aneuploid mammalian cells (2 x 107, e.g., HeLa cells) yield 100 µg of DNA in a volume of 1 ml. - [Read Isolation of DNA from Mammalian Cells by Spooling Protocol]
Method of choice when large amounts of mammalian DNA are required, for example, for Southern blotting (Rapid Isolation of Mammalian DNA, Rapid Isolation of Yeast DNA, Southern Blotting: Capillary Transfer of DNA to Membranes) or for construction of genomic libraries in bacteriophage {lambda} vectors. Approximately 200 µg of mammalian DNA, 100-150 kb in length, is obtained from 5 x 107 cultured aneuploid mammalian cells (e.g., HeLa cells). - [Read Isolation of High-molecular-weight DNA from Mammalian Cells Using Proteinase K and Phenol Protocol]
Protocol illustrates the rules of successful long PCR: No more than 1 ng of template DNA is used per microliter of PCR in a 100-µl reaction; approximately 0.1 µl of KlentaqLA (not plain Taq) is used per kilobase of target (for targets >10 kb, 1-1.3 µl of enzyme should be used); the Mg++ concentration is considered as the excess over the level of dNTPs. - [Read Long and Accurate PCR Protocol]
Protocol details the preparation of biotin-labeled target samples and hybridization of these samples to an Affymetrix in situ synthesized oligonucleotide GeneChip array. The procedure requires a minimum of 5 µg of purified total RNA as starting material. - [Read Microarray Protocol for Affymetrix In Situ Synthesized Oligo Arrays]
Protocol details the preparation of fluorescently labeled target samples (aminoallyl method) and hybridization of these samples to a microarray of Agilent inkjet-deposited presynthesized oligonucleotides. The procedure requires a minimum of 3 µg of purified total RNA as starting material. - [Read Microarray Protocol for Agilent Inkjet-Deposited Presynthesized]
Protocol details the preparation of fluorescently labeled target samples and hybridization of these samples to a microarray of Agilent inkjet-deposited presynthesized oligonucleotides. The procedure requires a minimum of 3 µg of purified total RNA as starting material. - [Read Microarray Protocol for Agilent Inkjet-Deposited Presynthesized Oligo Array]
Protocol details the preparation of fluorescently labeled target samples and hybridization of these samples to a microarray of Agilent inkjet-deposited presynthesized oligonucleotides. The procedure requires a minimum of 3 µg of purified total RNA as starting material. Includes: cDNA Synthesis; Fluorescent cRNA Synthesis; cRNA Precipitation and Cleanup; cRNA Quantification; Hybridization; Washing. - [Read Microarray Protocol for Agilent Inkjet-Deposited Presynthesized Oligo Arrays]
Simple protocol is used to extract DNA from small numbers of cultured cells and from fragments of soft or bony tissues. The method is used chiefly to genotype transgenic and knockout mice. Each 6-10-mm snippet of mouse tail yields 50-100 µg of DNA that can be used in dot or slot blotting to detect a transgene of interest, in Southern hybridization to detect DNA fragments that are <20 kb in size, and as a template in PCRs. - [Read Preparation of Genomic DNA from Mouse Tails and Other Small Samples Protocol]
Protocol permits the isolation of at least 3 µg of total RNA from approximately 150,000 cultured cardiac myocytes from adult mice. Includes: Treatment of Samples and Termination of Reactions; Isolation of RNA; Use of Environmental Chamber. - [Read Preparation of Myocyte RNA for Microarray Analysis Protocol]
Single-step technique, cells are homogenized in guanidnium thiocyanate and the RNA is purified from the lysate by extraction with phenol:chloroform at reduced pH. Many samples can be processed simultaneously and speedily. The yield of total RNA depends on the tissue or cell source and is generally in the range of 4-7 µg/ml starting tissue or 5-10 µg/106 cells. IMPORTANT: Prepare all reagents used in this protocol with Diethyl pyrocarbonate (DEPC)-treated H2O. - [Read Purification of RNA from Cells and Tissues by Acid Phenol-Guanidinium Thiocyanate-Chloroform Extract]
In this protocol, double-stranded DNA probes, labeled in each strand, are produced in conventional PCRs containing equal concentrations of two primers, a double-stranded DNA template, three unlabeled dNTPs at concentrations exceeding the Km, and one [{alpha}-32P]dNTP at a concentration at or slightly above the Km (2-3 µm) for a thermostable DNA polymerase such as Taq. - [Read Radiolabeling of DNA Probes by the Polymerase Chain Reaction Protocol]
Protocol describes how double-stranded DNA probes, labeled in each strand, are produced in conventional PCRs containing equal concentrations of two primers, a double-stranded DNA template, three unlabeled dNTPs at concentrations exceeding the Km, and one [{alpha}-32P]dNTP at a concentration at or slightly above the Km (2-3 µm) for a thermostable DNA polymerase such as Taq. - [Read Radiolabeling of DNA Probes by the Polymerase Chain Reaction Protocol]
Mammalian DNA prepared from blood or tissues as described in this protocol is 20-50 kb in size and suitable for use as a template in PCRs. The yields of DNA vary between 0.5 and 3.0 µg/mg tissue or 5 and 15 µg per 300 µl of whole blood. - [Read Rapid Isolation of Mammalian DNA Protocol]
A Single Stranded Plasmid DNA Isolation Protocol describing the production and isolation of single-stranded DNA (ssDNA) using bacteriophagemid-containing bacteria and helper phage. Infection of the host cells with helper phage allows for packaging of ssDNA into bacteriophage. The ssDNA can then be isolated from phage particles.
DNA microarrays are an ordered arrangement of DNA molecules complementary to genes of interest that are "spotted" by robotic equipment onto a glass slide substrate. The expression of genes in cells can be monitored with microarrays by preparing cDNA from the mRNA of cells of interest and measuring the hybridization to the microarray. This protocol describes the labeling of genomic DNA for use as a probe for hybridization to the cDNA spotted on the array.
Tubulin is polymerized into microtubules by incubating tubulin at 37°C with GTP. A nucleation seed is added when the purpose is to assay microtubule elongation. Tubulin can also be polymerized for the purposes of recycling the tubulin or labeling the microtubules with fluorescently labeled tubulin. Based on the protocol by Timothy Mitchison of Harvard University.
This Microarray Protocol Preparation of Fluorescent DNA Probes from Human mRNA protocol describes the production of probes labeled with the fluorescent dyes, Cy3 and Cy5, following the synthesis of cDNA from human mRNA and the hybridization of the probes to DNA microarrays.
A single step RNA isolation protocol using Phenol Chloroform Extraction and Acid Guanidinium Thiocyanate. This RNA isolation method uses the fact that guanidinium thiocyanate can simultaneously lyse the cells and inactive cellular RNAses during the initial RNA isolation step allow a single step in the method.
Paraffin Embedding Protocol for molecular profiling. This Paraffin Embedding Protocol describes the processing of the tissues into sections following ethanol fixation. Molecular profiling (MP) is a technique that is used to visualize the global patterns of RNA expression or protein expression in various cell types and disease processes.