To identify the YAC subclones containing both a human insert and a portion of either the left or right arm of the pYAC4 vector. Identification of these clones is necessary in order to do YAC chromosome walking, and is also useful in the determination of whether a particular YAC clone has a contiguous human insert or whether a co-cloning event has occurred. Vector arm sequences are identified using pBR322 fragments from a BamHI-PvuII double digest. - [Read Identification of End Clones in YAC Subclone Libraries Protocol]
Protocol for the identification of single bacterial cells using DIG-labeled oligonucleotides. Includes: Organisms and growth conditions; Cell fixation and preparation of cell smears; DIG labeling of oligonucleotides with DIG-ddUTP; In situ hybridization using digoxigenin-labeled oligonucleotides; Detection of DIG-labeled oligonucleotides with fluorescently labeled anti-DIG Fab fragments; Detection of DIG-labeled oligonucleotide. - [Read Identification of Single Bacterial Cells using DIG-Labeled Oligonucleotides Protocol]
Inverse PCR is used to amplify and clone unknown DNA that flanks one end of a known DNA sequence and for which no primers are available. The technique involves digestion by a restriction enzyme of a preparation of DNA containing the known sequence and its flanking region. The individual restriction fragments (many thousands in the case of total mammalian genomic DNA) are converted into circles by intramolecular ligation, and the circularized DNA is then used as a template in the PCR. - [Read Inverse PCR Protocol II]
Pilot ligations and packaging reactions are used to establish the amounts of fragmented genomic DNA and bacteriophage {lambda} arms that yield the maximum number of recombinants. Additional ligation and packaging reactions may then be set up to yield a comprehensive library of genomic DNA. - [Read Ligation of Bacteriophage lambda Arms to Fragments of Foreign Genomic DNA Protocol]
Protocol can be used to optimize ligation conditions for difficult to clone (e.g. very large) fragments. The principle is to independently characterize the ligation kinetics of the vector and insert DNA fragments and then to combine them in optimal ratios. - [Read Ligation Optimization Protocol]
Plasmid (pUC series) containing genomic DNA fragments are maintained in E. coli strain DH5aTM. The E. coli cultures are routinely cultured at 37 C on Luria-Bertani (LB) agar on or in LB broth containing Ampicillin (30 µg/ml) or Carbenicillin (50 µg/ml broth, 100 µg/ml agar). E. coli strains are usually preserved in stab agar or glycerol for mid-term storage and lyophilized for long-term storage. - [Read Maintenance of Probes in Bacteria Including Escherichia coli Protocol]
Molecular Cloning of PCR Products Protocol- https://catalog.invitrogen.com/index.cfm?fuseaction=iProtocol.unitSectionTree&treeNodeID=3DC8DA9CD690052F2234D07559CD9BFE&objectid=6676A195E9797060CC491B4B58ECC2E1
The efficiency of direct cloning of PCR products can be improved by generating suitable ends on the amplified fragments. This protocol describes the strategies for generating and manipulating suitable ends on the PCR fragments. - [Read Molecular Cloning of PCR Products Protocol]
Protocol describes the purification, quantification, andsubsequent sequencing of amplified DNA fragments using PCR.Excess nucleotides are removed from the initial PCR productsusing spun columns, and the products are quantified using fluorometry. - [Read Nonradioactive Cycle Sequencing of PCR-Amplified DNA Protocol]
Protocol is used to establish conditions for restriction enzyme digestion of eukaryotic genomic DNA that will generate fragments of a size appropriate for construction of genomic libraries. To construct a genomic library, the average length of the starting genomic DNA should be at least eight times the capacity of the vector. - [Read Partial Digestion of Eukaryotic DNA for Use in Genomic Libraries: Pilot Reactions Protocol]
Procedure details the establishment of an amplification procedure for GC-rich sequences. The DNA fragments of interest are amplified in the presence of either 5% DMSO, 1 M betaine, 2 M betaine, 1 M betaine, and 5% DMSO; 2 M betaine and 5% DMSO; 0.4 M tetramethylene sulfone; or without any of the enhancers. - [Read PCR Amplification of Highly GC-Rich Regions Protocol]
Method is used chiefly to genotype transgenic and knockout mice. Each 6-10-mm snippet of mouse tail yields 50-100 µg of DNA that can be used in dot or slot blotting to detect a transgene of interest, in Southern hybridization to detect DNA fragments that are <20 kb in size, and as a template in PCRs. - [Read Preparation of Genomic DNA from Mouse Tails and Other Small Samples Protocol]
Simple protocol is used to extract DNA from small numbers of cultured cells and from fragments of soft or bony tissues. The method is used chiefly to genotype transgenic and knockout mice. Each 6-10-mm snippet of mouse tail yields 50-100 µg of DNA that can be used in dot or slot blotting to detect a transgene of interest, in Southern hybridization to detect DNA fragments that are <20 kb in size, and as a template in PCRs. - [Read Preparation of Genomic DNA from Mouse Tails and Other Small Samples Protocol]
Protocol describes the production of double-stranded RNA (dsRNA) from fragments of cDNAs of candidate genes. The cDNA fragments must be cloned in plasmids with a flanking SP6 and T7 promoter (e.g., pSP72 or pCRII). The plasmid is linearized and sense and antisense RNAs are produced separately by in vitro transcription. After purification, the RNA strands are annealed to yield a dsRNA molecule suitable for RNAi in avian embryos. - [Read Production of dsRNA for RNAi in Avian Embryos Protocol]
Protocol describes the production of double-stranded RNA (dsRNA) from fragments of cDNAs of candidate genes. The cDNA fragments must be cloned in plasmids with a flanking SP6 and T7 promoter (e.g., pSP72 or pCRII). The plasmid is linearized and sense and antisense RNAs are produced separately by in vitro transcription. - [Read Production of dsRNA for RNAi in Avian Embryos Protocol]
Protocol guide for the N. crassa yeast artificial chromosome library. Includes: Chromosome Walking; Hybridization screening of the YAC library; YAC restriction mapping and contig building; Preparation of chromosomal DNA plugs of YAC clones; Partial restriction enzyme digestion of YAC DNA plugs; Using CHEF gel analysis to resolve YAC clones; Southern Hybridization; Isolation of terminal restriction fragments from cloned DNA inserts in YAC clones; etc. - [Read Protocol Guide for the N. crassa Yeast Artificial Chromosome Library]
Protocol for the purification of DNA recovered from agarose and polyacrylamide gels by anion-exchange chromatography. Fragments of DNA recovered from agarose gels are sometimes poor templates or substrates in subsequent enzymatic reactions. This problem can be solved by binding the DNA to a positively charged matrix, such as DEAE-Sephadex or DEAE-Sephacel, in buffers of low ionic strength. After washing the matrix, the DNA is eluted by raising the strength of the buffer. - [Read Purification of DNA Recovered Anion-exchange Chromatography Protocol]
In this protocol sequences cloned in standard bacteriophage or plasmid vectors are amplified in PCRs containing primers targeted to flanking vector sequences. The amplified fragments can be analyzed by gel electrophoresis, DNA sequencing, and/or restriction mapping. Many colonies or plaques can be assayed simultaneously. - [Read Rapid Characterization of DNAs Cloned in Prokaryotic Vectors Protocol]
The DNA Ligation protocol described here contains the steps required to join together using ligase enzyme both plasmid DNA and insert DNA fragments in order to create a new plasmid. This new ligated plasmid can be transformed after into competent bacteria to produce DNA for mini, midi or maxi-prep isolation.
The protocol gives general considerations for the design of targeting vectors for transgenic mice. The protocol shares tips in the design of knock-out and knock-in vectors and some of their strategies for producing homologously recombined embryonic stem cells.