Protocol for configuration, column construction, and column packing for a capillary liquid chromatography system. Protocol describes a procedure for adapting conventional HPLC systems to provide accurate low-flow rates (0.4-4 µl/min) and gradients required to operate slurry-packed capillary columns. A key component of this system is a commercial axial-beam longitudinal flow cell that can be fitted to several commercial UV detectors. - [Read Configuration Column Construction Column Packing for Capillary Liquid Chromatography]
Cheek cells obtained by rinsing the mouth commercial mouth wash solution. Mouth wash is then discarded into a sterile conical tube and sent to the lab. Based on Salting out procedure. DNA Laboratory, Medical School, Malta. - [Read DNA Extraction from Cheek Cells]
Treating cells with paraformaldehyde leads to the establishment of chemical cross-links between free amino groups. When the cross-links join different molecules, a latticework of interactions occurs that holds the overall architecture of the cell together. Commercial formaldehyde solutions are not recommended, because they lack the advantages of using a variable-length polymer, and the cells will simultaneously be fixed with the alcohol (usually methanol). - [Read Fixing Attached Cells in Paraformaldehyde Protocol]
Protocol describes a procedure for adapting conventional HPLC systems to provide accurate low-flow rates (0.4-4 µl/min) and gradients required to operate slurry-packed capillary columns. A key component of this system is a commercial axial-beam longitudinal flow cell that can be fitted to a number of commercial UV detectors. - [Read Packing Capillary Columns for RP-HPLC Protocol]
This protocol describes the storage of "homemade" purified antibodies. Antibodies from commercial sources are normally supplied with proper storage conditions. - [Read Storage of Purified Antibodies]
Tubulin is polymerized into microtubules by incubating tubulin at 37°C with GTP. A nucleation seed is added when the purpose is to assay microtubule elongation. Tubulin can also be polymerized for the purposes of recycling the tubulin or labeling the microtubules with fluorescently labeled tubulin. Based on the protocol by Timothy Mitchison of Harvard University.
The protocol gives general considerations for the design of targeting vectors for transgenic mice. The protocol shares tips in the design of knock-out and knock-in vectors and some of their strategies for producing homologously recombined embryonic stem cells.