20% is high for acrylamide. Have you considered a tricine gel? If you
absolutely need sds page 4c @ 18mA overnight should work fine. Also, if
you are using a premixed concentrate for your running buffer the pH can
be affected by your water source.
From: [Only registered users see links. ]
[mailto:[Only registered users see links. ].indiana.edu] On Behalf Of yan sun
Sent: Sunday, April 27, 2008 11:39 PM
To: Haviland, David L
Cc: [Only registered users see links. ]
Subject: Re: Page gel
run 20% gel 4w around 10 hours, but the ladder is diffused, I mean the
band is really wide"(
did it happen to you?
if you run under very low watage, it is easy to diffuse.
On 4/27/08, Haviland, David L <[Only registered users see links. ].edu> wrote:
by 9 am
Methods mailing list [Only registered users see links. ] [Only registered users see links. ]
This email has been scanned by the MessageLabs Email Security System.
For more information please visit [Only registered users see links. ]
Please consider the environment before printing this e-mail
This email and any files transmitted with it are confidential and
may be legally privileged and are intended solely for the use of
the individual or entity to whom they are addressed. If you are
not the intended recipient please note that any disclosure,
distribution, or copying of this email is strictly prohibited and may
be unlawful. If received in error, please delete this email and any
attachments and confirm this to the sender.