| | |||||||
| Register | Search | Today's Posts | Mark Forums Read |
| Protocols and Methods Forum Post Any Protocol, Method, Technique, Procedure or Tips / Troubleshooting for any Molecular Biology Technique. |
| | LinkBack | Thread Tools | Display Modes |
|
#1
| ||||
| ||||
| For cell culture lab it is usually required that we have an installation of Air handling unit to purify the air that circulates in the room, but that also create positive pressure in the room, and in the same cell culture room we have instruments like biosafty cabinet and laminar flower that also have positive pressure, so due to presence of positive pressure in room and also within these instruments is it the possibiltiy of interfaring of working and also interfarence in the positive pressures, and the chances that air from the room with positive pressure distrub the positive pressure within the instruments mentioned above and result in contemination. the person who have such an experience plz guide me. aftab |
|
#2
| |||||||||||
| |||||||||||
| Aftab, I have had experience with your situation. The air purification unit must be placed/installed away from the biosafety cabinets as far as is possible. The effects of the biosaftey cabinets are necessarily limited to the area within the cabinet itself, so this will not interfere with the room's air circulation. The effect of the air purifier although affecting the majority of the lab, will fall gradually with distance from the unit itself. We had the same dilemma when we were fitting out unit and we were advised to place it in the opposite corner of the room from the biosafety cabinets. Hope this helps, Canalba, UK |
|
#3
| |||||||||||
| |||||||||||
| what should the pressure be in w.c.? |
|
#4
| ||||||||||||
| ||||||||||||
| Great post Canalba, Jamey i am not sure I will check though |
| Tags |
| lab , positive , pressure |
| Thread Tools | |
| Display Modes | |
|
|
| | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Positive dot blot, negative WB | durante | Western Blot Forum | 1 | 04-22-2010 09:07 AM |
| Measuring water level reliably in tanks under pressure | Micik | Physics Forum | 0 | 06-14-2008 07:31 PM |
| GNU units and units.dat; Units of Measurement and Unit Conversion | James Redford | Physics Forum | 0 | 07-31-2005 12:08 PM |
| Need help solving a water pressure problem. | occasionaluse@hotmail.com | Physics Forum | 2 | 07-20-2005 04:36 PM |
| Push Gravity | Peter Kinane | Physics Forum | 229 | 01-29-2004 01:02 AM |